logo
المنزل > المنتجات > قطع غيار سيارات تيسلا >
Matte Finish High Durability Door Electric Release Switch for 2021+ Tesla Model 3/Y Front Left-Hand

Matte Finish High Durability Door Electric Release Switch for 2021+ Tesla Model 3/Y Front Left-Hand

Matte Finish Door Electric Release Switch,High Durability Electric Door Switch,2021+ Tesla Model 3/Y Door Release Switch

High Durability Electric Door Switch

2021+ Tesla Model 3/Y Door Release Switch

مكان المنشأ:

الصين

اسم العلامة التجارية:

CFN

رقم الموديل:

1094956-02-e

اتصل بنا
اطلب اقتباس
تفاصيل المنتج
لون:
أسود
متانة:
عالي
مادة:
المواد المركبة
وزن:
0.023 كجم
مقاس:
12*5*4
إبراز:

Matte Finish Door Electric Release Switch,High Durability Electric Door Switch,2021+ Tesla Model 3/Y Door Release Switch

,

High Durability Electric Door Switch

,

2021+ Tesla Model 3/Y Door Release Switch

شروط الدفع والشحن
الحد الأدنى لكمية
1
الأسعار
negotiable
تفاصيل التغليف
14*14*13 قطعة واحدة ، مربع
وقت التسليم
5-8 أيام العمل
شروط الدفع
L/C ، D/A ، D/P ، T/T ، Western Union ، Moneygram
وصف المنتج

CFN Brand Matte Front Left-Hand Door Electric Release Switch for Tesla Model Y/Model 3 (2021+) | 1094956-02-E

If the front left-hand door of your 2021+ Tesla Model 3 or Model Y won’t unlock/ release when you press the interior switch—whether it’s unresponsive, sticks mid-press, or triggers a “door release error” on the touchscreen—this CFN matte electric release switch (matching OEM part 1094956-02-E) is the solution to restore seamless door control. As an engineered replacement (not Tesla OEM), it replicates the original’s electrical specs, matte finish, and mounting design, ensuring perfect integration with your Model 3/Y’s door control system.
This switch is the “direct command” for your front left door’s electric release mechanism: when pressed, it sends a signal to the door’s locking motor to disengage the latch—critical for easy interior exit. Unlike generic switches that may have mismatched finishes or weak signal transmission, this CFN part matches the 2021+ Model 3/Y’s interior matte texture (no glossy “aftermarket” look) and uses OEM-grade copper contacts to ensure consistent signal flow, avoiding intermittent failures.
Durability is tailored to daily use: the switch’s housing is scratch-resistant ABS plastic with a matte coating that resists finger smudges and wear (ideal for frequent presses). Its tactile button is calibrated to the original’s “soft click” feedback—firm enough to prevent accidental presses, gentle enough for easy use. The wiring connector is a direct plug-and-play match for the door’s electrical harness, no splicing needed.
Installing it takes basic DIY skills: Pry off the front left door’s interior switch panel (use a soft trim tool to avoid scratching the matte surface), disconnect the old switch’s harness, remove the 2 small mounting screws, and swap in the CFN switch. Reattach the panel, then test by pressing the switch—your door should release smoothly with no errors.
Note: This switch is exclusive to 2021+ Tesla Model 3/Model Y front left-hand doors and won’t fit older models (2020-) or other door positions. It’s perfect for fixing unresponsive or worn release switches, keeping your door’s interior control both functional and visually consistent with Tesla’s design.

أرسل استفسارك مباشرة إلينا

سياسة الخصوصية الصين جيدة الجودة قطع غيار سيارات تيسلا المورد. حقوق الطبع والنشر © 2024-2025 Guangzhou Fuheng Auto Parts Supply Chain Co., Ltd. . كل شيء حقوق محجوزة