CFN Brand Front End Module Radar Bracket Assembly for Tesla Model X (2021+) | 1617434-00-B

Product Overview

Key Features & Benefits

1. ADAS Radar Alignment Precision

• Factory-Matched Angle: Calibrated to the exact 0.5° tilt and horizontal alignment of the 2021+ Model X’s OEM radar bracket—essential for accurate radar signal detection (misalignment causes ADAS errors or false alerts).
• No Post-Install Calibration Needed: Pre-drilled mounting holes align perfectly with the front end module and radar unit, eliminating the need for professional ADAS recalibration (saves time and cost vs. generic brackets).

2. Durable, ADAS-Grade Construction

• Material: High-strength, glass-reinforced nylon (same as OEM) with an impact-resistant coating—withstands front-end vibrations, road debris impacts, and extreme temperatures (-40°C to 85°C, ideal for the radar’s operating environment).
• Structural Stability: Reinforced rib design prevents flexing or warping over time, ensuring the radar maintains its factory position (avoids gradual misalignment that degrades ADAS performance).

3. Critical for ADAS Safety & Function

• Acts as the “stable base” for Model X’s front radar: the radar depends on this bracket to stay fixed, enabling accurate detection of vehicles, pedestrians, and obstacles up to 250 meters ahead.
• Fixes common issues like “Radar Signal Weak” or “Autopilot Unavailable” caused by a damaged or shifted original bracket—restores full ADAS functionality.

Specifications

Installation Guide

1. Safety Prep: Turn off the vehicle, disconnect the 12V battery (per Tesla’s service manual), and remove the front bumper cover (use a soft trim tool to avoid scratches) to access the radar and bracket.
2. Remove Old Bracket: Disconnect the radar’s electrical connector, then use a Torx T25 wrench to remove the OEM bolts securing the old bracket to the front end module and radar unit. Set aside the radar and hardware.
3. Install CFN Bracket: Align the new bracket with the front end module’s mounting points, secure it with the original bolts (torque to 3.5 N·m, per Tesla specs), then reattach the radar to the bracket (torque radar bolts to 2 N·m).
4. Reconnect & Test: Reconnect the radar’s electrical connector, reattach the front bumper cover, and reconnect the 12V battery. Turn on the vehicle—check the touchscreen for ADAS errors; test Autopilot (in a safe, controlled environment) to confirm normal operation.

Compatibility Note

Why Choose This Bracket?

• Restores ADAS functionality without costly dealer recalibration (thanks to factory-aligned design).
• OEM-grade material ensures long-term reliability—avoids frequent bracket replacements.
• Critical for maintaining Tesla’s safety standards: a stable radar bracket is non-negotiable for accurate ADAS performance.