Front Bumper Radar Bracket for Tesla | 1097483-00-C

Product Overview

Key Specifications

Why It Matters for ADAS Performance

• Precision Alignment: The bracket’s engineered geometry positions the radar at a factory-specified 3° downward angle, ensuring the sensor’s detection range (up to 160m) is optimized for road-level objects—critical for accurate distance measurements to vehicles, pedestrians, and obstacles.
• Vibration Resistance: Reinforced ABS construction dampens engine and road vibrations, preventing radar "noise" that could trigger false alerts or reduce detection accuracy.
• Impact Protection: Acts as a buffer in minor front bumper collisions, absorbing shock to protect the radar unit from damage. Its flexibility allows controlled deformation without cracking, preserving alignment post-impact.
• Weather Durability: Resists UV degradation, moisture, and road chemicals (salt, debris), ensuring long-term structural integrity—even in harsh climates.

Signs It Needs Replacement

• ADAS Warning Lights: Illumination of Autopilot or radar failure warnings (indicates misalignment or bracket damage affecting sensor data).
• Loose Radar Unit: Visible movement of the radar within the bumper (caused by cracked or worn bracket mounts).
• Bumper Damage: After a minor front collision, check for cracks or warping in the bracket—even small deformations can throw off radar alignment.
• Inconsistent Autopilot Performance: Erratic braking, sudden distance adjustments, or failure to detect obstacles (often traceable to misaligned radar due to bracket issues).

Installation Guidelines

• Professional Installation Recommended: Proper alignment is critical for ADAS functionality. Steps include:
  1. Remove the front bumper cover (follow Tesla’s factory procedure for your model).
  2. Disconnect the radar’s electrical connector (if replacing an existing bracket).
  3. Position the new bracket in the bumper, aligning pre-drilled holes with factory mounting points.
  4. Secure with M6 bolts (included) using a 10mm socket, torquing to 8 Nm (5.9 ft-lbs)—do not over-tighten to avoid cracking.
  5. Reattach the radar unit to the bracket, reconnect the harness, and reinstall the bumper.
• Calibration Note: After installation, a Tesla service scanner is required to recalibrate the radar (ensures alignment with vehicle systems).
• Pro Tip: Inspect the bracket annually during bumper maintenance to catch cracks or loosening early.

For Tesla Owners