Rear Bumper Radar Bracket for Tesla | 1565573-00-A

Product Overview

Key Specifications

Why It’s Critical for Rear ADAS Performance

• Precision Alignment: Engineered to position rear radar sensors at a factory-calibrated 2° upward angle, ensuring optimal detection range (up to 50m) for blind spots, cross-traffic, and nearby vehicles. Misalignment due to a faulty bracket can cause delayed alerts or false warnings, compromising safety.
• Vibration Dampening: The reinforced PP material absorbs road vibrations and engine noise, preventing interference with radar signals. This stability ensures consistent data transmission to the vehicle’s ADAS control module, keeping safety features responsive.
• Impact Protection: Acts as a shock absorber in minor rear collisions. Its flexible yet durable structure allows controlled deformation, protecting the radar unit from damage while maintaining alignment post-impact—reducing repair costs.
• Weather Resistance: Resists corrosion from road salt, rain, and UV rays, ensuring long-term structural integrity. Unlike generic brackets, it won’t degrade or crack in harsh climates, preserving radar performance for years.

Signs It Needs Replacement

• ADAS Warning Lights: Illumination of Blind Spot or Rear Cross-Traffic Alert warnings on the dashboard (indicates radar misalignment due to bracket damage).
• Loose Radar Housing: Visible movement of the rear radar within the bumper (caused by broken clips or cracked mounting points on the bracket).
• Rear Bumper Damage: After a minor collision, check for cracks or warping in the bracket—even small shifts can disrupt radar accuracy.
• Inconsistent Safety Features: Failure of Blind Spot Monitoring to detect vehicles, or Rear Cross-Traffic Alert not warning of approaching obstacles (often linked to bracket-related misalignment).

Installation Guidelines

• Professional Installation Recommended: Proper alignment is critical for rear ADAS functionality. Steps include:
  1. Remove the rear bumper cover (follow Tesla’s factory procedure for your model to access the radar mounting area).
  2. Disconnect the radar’s electrical connector (if replacing an existing bracket) to avoid wiring damage.
  3. Position 1565573-00-A in the rear bumper, aligning pre-threaded holes and snap clips with factory mounting points.
  4. Secure with M5 bolts (included) using an 8mm socket, torquing to 6 Nm (4.4 ft-lbs)—do not over-tighten to prevent cracking.
  5. Reconnect the radar’s electrical harness, then reinstall the rear bumper cover.
• Calibration Note: After installation, a Tesla-compatible scanner is required to recalibrate the rear radar (ensures alignment with vehicle systems for accurate ADAS performance).
• Pro Tip: Inspect the bracket during routine rear bumper maintenance to catch cracks or loosening early—preventing safety feature failures.

For Tesla Owners