This right-hand (RH) small fog light bracket (part number 1588189-02-A) is an OEM-matching auxiliary component, exclusively designed for 2021 and later Tesla Model X vehicles. It precisely fits the front bumper’s right-side small fog light (or auxiliary fog light) mounting structure, aligning with the Model X’s front-end design and auxiliary lighting layout. Its core function is to provide stable, precise support for the small fog light: it secures the compact light assembly to the bumper’s inner frame, maintaining factory-calibrated irradiation angles—ensuring the auxiliary fog light complements the main fog light, expanding low-visibility road coverage (e.g., fog, rain) without causing glare to oncoming traffic. Additionally, it absorbs micro-vibrations from driving (preventing the small fog light from loosening, lens scratching, or wiring contact failure) and seals the gap between the light and bumper, blocking dust, road salt, and water splashes from entering the mounting cavity to avoid internal corrosion of the light assembly.

Crafted from high-strength PP (Polypropylene) plastic with a black matte finish, the bracket balances compactness (dimensions: ~45mm×30mm×20mm) and durability. The PP material resists impact from small road debris (e.g., fine gravel kicked up by the right front wheel) without cracking, and withstands extreme temperature fluctuations (-30°C to 85°C)—suitable for snowy, coastal, or high-heat regions. It also resists UV fading (passes 400-hour ASTM G154 UV tests) and chemical erosion from car wash cleaners, ensuring long-term consistency with the front bumper’s inner trim in both appearance and performance.

Installation follows Tesla’s 2021+ Model X service standards, taking 15–20 minutes with basic tools (8mm socket, precision trim tool): 1. Open the frunk, use a trim tool to gently peel back the right front bumper’s inner auxiliary trim (avoid damaging the bumper’s plastic clips); 2. Locate the old small fog light bracket, detach 2 factory bolts (8mm socket) and 1 plastic snap clip to remove the worn part; 3. Clean the mounting surface with a dry cloth to eliminate dust, debris, or residual adhesive; 4. Align the CFN bracket with the bumper’s small fog light mounting points, tighten the bolts to 4±0.3 Nm (per Tesla’s official torque specs) and snap the plastic clip into place; 5. Reinstall the small fog light onto the bracket, connect the wiring harness, and test the light to confirm no beam deviation; 6. Reattach the auxiliary trim and check for a flush, gap-free fit.

After-sales support includes a 3-year warranty (covering manufacturing defects such as cracked plastic, misaligned mounting holes, or broken clips; excluding damage from improper installation, heavy impact, or off-road use) and protective packaging: 1 piece per pack (wrapped in anti-scratch film + mini hard cardboard box) to prevent surface damage during transport. For repair shops or Tesla service centers, bulk packs (25 pieces/box) are available, ensuring consistent quality for every 2021+ Model X right small fog light replacement. This bracket is essential for maintaining the auxiliary fog light’s functional stability and extending the service life of the Model X’s front lighting system.